BHG1 jerin 200-400A 3-10KV Mine fashewa-hujja babban ƙarfin lantarki na USB junction akwatin

Takaitaccen Bayani:

Cikakken Bayani

Tags samfurin

Bayanin Samfura

BHG jerin ma'adanin wuta mai hana wuta mai ƙarfi akwatin junction na USB (wanda ake magana da shi a matsayin akwatin junction) ya dace da ma'adinan kwal na ƙarƙashin ƙasa wanda ke ɗauke da fashewar iskar gas (methane) da cakuda ƙurar kwal.Ana amfani da 315A da 200A don haɗin kebul da reshe a cikin sigina, hasken wuta da kayan wuta.
Rubutun da ke tabbatar da fashewar akwatin junction yana da tsarin farantin karfe, murfin yana cikin nau'i na crimping na bolt, ƙarfin wutar lantarki yana a bangarorin biyu, kuma akwai na'urar sarrafa wutar lantarki;akwai manyan tashoshi guda uku a cikin harsashi, kuma farantin matsi na sama na tasha yana lalata shugaban kebul;Tushen babban ƙarfin lantarki ne na lantarki kuma yana da tashar taimako.

Akwatin haɗin kebul mai ƙarfi mai ƙarfin fashewar ma'adinai

Siffar Samfura

Siffofin fasaha

Siffofin samfur da yanayin Aiki

Fasalolin samfur:
1. Akwatin junction yawanci ya ƙunshi harsashi mai hana wuta (harsashi, murfin) CM05, shinge mai shinge, na'urar shigar da kebul, da ƙasa na ciki da na waje;
2. Harsashi da murfin an yi su ne daga lebur mai hana wuta ta hanyar kusoshi da sauran haɗe-haɗe;
3. An yi shingen tashar da aka yi da yumbu mai tsabta mai tsabta, wanda aka danna, daɗaɗɗa da glazed, kuma yana da kyawawan kayan aikin lantarki.
Yanayin amfani da samfur:
1. Matsi na yanayi 80KPa-106 Kpa
2. Yanayin zafin iska -20°C—+40°C
3. Dangin iska bai wuce 95% (+25°C)
4. Babu ƙarfi mai ƙarfi da girgiza Wurare
5. Wuraren da babu ruwan ɗigo, ruwan sama da kutsawar dusar ƙanƙara
6. Wuraren da babu gurbataccen iskar gas da tururi wanda zai iya lalata karafa da rufin

Abubuwan amfani da samfur

1. Bayan an kwance akwatin junction, ya kamata a duba don lalacewa da ɓarna.
2. Ya kamata a rataye akwatin haɗin gwiwa a tsaye a kan ɓangaren sama na hanya ko kuma a daidaita shi a kan wani sashi na musamman.
3. Ya kamata igiyoyi a ƙarshen jagorar a bangarorin biyu ya kamata su sami adadin da ya dace, kuma kada a ɗora shugabannin kebul.
4. Bayan bangarorin biyu na kebul sun shiga cikin akwatin, majinin damuwa a ƙarshen kebul yana buƙatar gyarawa tare da pallet.
5. Wurin dandali na 30mm maras kyau a duka ƙarshen kebul ɗin ana danna shi tare da kwaya na matsawa na musamman zuwa tashar (aiki tare da maɓalli na musamman) don tabbatar da amintaccen haɗin gwiwa, kuma ba a ba da izinin ƙwanƙwasa ba.
6. Dole ne a cika ƙullun kayan ɗamara na duk sassan akwatin junction kuma ma'aikata na musamman su bincika akai-akai.Idan akwai wata matsala, dole ne a magance ta cikin lokaci.
7. Ba dole ba ne a gudanar da gyaran da kuma sake komawar akwatin junction a ƙarƙashin yanayin wutar lantarki mai rai.Dole ne a buɗe murfin bayan an yanke wutar lantarki kuma an fitar da shi ta hanyoyi masu aminci bisa ga buƙatun "Dokokin Tsaro na Coal Mine".
8. Akwatin mahaɗa dole ne ya zama ƙasa dogara lokacin da ake amfani da shi.
9. Kafin prefabricating na USB m, da matsawa flange, sealing zobe, rike zobe da kuma haɗa sashe dole ne a sleeved a cikin na USB, da kuma na USB m dole ne a sarrafa bisa ga m samar da high-voltage na USB.
10. Lokacin da ba a gabatar da waya mai sarrafawa ba, yi lanƙwasa wayoyi na garkuwar sa ido a ƙarshen duka tare kuma haɗa su ta tashoshi masu taimako.Saƙa wayoyi na ƙasa a ƙarshen duka biyu tare kuma haɗa su zuwa na'urori na ƙasa na ciki daban-daban.